Polyester paint has many advantages. The characteristic of polyester paint is that acyclic and/or circular hydrogen bonds can be formed between polymer molecules. Under the action of external force, the hydrogen bonds can be separated and absorb external energy (20~25kJ per mole). When the external force is removed, hydrogen bonds can be re-formed. The reversible repetition of such hydrogen bond splitting and re-formation makes the polyurethane paint film highly mechanically wear-resistant and tough. Compared with other paints, under the same hardness conditions, due to the effect of hydrogen bonds, the polyurethane paint film has the highest elongation at break, so it is widely used as floor paint, overtime paint, high decorative anti-corrosion paint, etc.
The paint film has strong adhesion. Polyurethanes, like epoxies, formulate into excellent adhesives. Therefore, the coating film has excellent adhesion to various surfaces (metal, wood, rubber, concrete, some plastics, etc.). The author’s experience is that: for some metal surfaces, the adhesion of polyurethane paint is slightly inferior to epoxy paint; but for rubber, polyurethane paint exceeds epoxy paint.
Polyurethane paints can be dried at high temperatures and cured at low temperatures. Among the typical room temperature curing coatings: epoxy, polyurethane, and unsaturated polyester, epoxy and unsaturated polyester are difficult to cure below 10°C, and only polyurethane can be cured normally at 0°C, so it is the best season for construction. long. Because it can quickly solidify at room temperature, it can be applied at room temperature for large-scale projects such as large oil tanks and large aircraft to achieve better results than ordinary baking paint. Some varieties of coatings (such as epoxy, chlorinated rubber, etc.) have good protective properties but poor decorative properties; some varieties (such as nitro paint, etc.) have good decorative properties but poor protective properties. However, polyurethane paint has both protective and decorative properties, and can be used for coating high-grade wood, pianos, and large airliners.